IMPORTANT NOTES
FPM
Boljevac
ROTARY RAKE STORAGE
FPM Boljevac
Page 21
-
Before adjusting or maintaining the
machine, turn off the tractor engine and
remove the ignition key.
-
Check the tension of all the screws and
nuts after the first few hours of
operation.
-
Check the tire pressure regularly. It
should be approx. 2 bar.
-
Check all sliding and rotating parts and
nipples for proper lubrication.
-
Prevent the PTO shaft guard from
rotating using the provided chains.
-
Do not allow the friction clutch to slip for
more than a few seconds.
-
Always use scotch blocks for parking
the machine. Do not forget to raise the
machine into the transport position
during operation or transport.
-
During operation or transport, secure
the machine to prevent it moving
(swinging) sideways using the stabiliser
chains.
-
If the rake is going to be out of
operation for a longer period of time,
remove all dirt and grass accumulated
on the rake parts that come into
contact with them. Pay particular
attention to the inside of the swath
board.
-
Wash the machine thoroughly after
cleaning.
-
Lubricate all the sliding and rotating
parts and nipples.
-
Carefully remove excess grease with
a cloth.
-
Replace all damaged or broken tines.
-
Tighten all screws and nuts on the
machine.
-
Clean
rusty
spots
and
apply
protective paint to all exposed
surfaces.
-
Raise the machine onto a wooden
platform under a roof or in a separate
room.
-
If the above operations are performed
with due care, the machine is mobile
and ready for operation.
ATTENTION: THIS SYMBOL IS USED IN THE MANUAL WHENEVER
YOUR PERSONAL SAFETY IS CONCERNED. BE CAREFUL!
Содержание 627 035
Страница 22: ...Page 22...