FPG IN 4C08 IN 4C12, Руководство по эксплуатации продукта

Страница: 14 / 40

Part No. 26120 Rev. G August 2018
- 14 - Inline 4000 Series Cabinets
CLEANING
Cautions
REFRIGERATED CABINETS
-
CLEANING
Power ALWAYS SWITCH THE ELECTRICITY SUPPLY OFF BEFORE CLEANING.
Water THIS UNIT IS NOT WATERPROOF. DO NOT USE A WATER JET SPRAY
TO CLEAN THE INTERIOR OR EXTERIOR OF THIS CABINET.
Exterior
REFRIGERATED CABINETS
-
CLEANING
Metal Surfaces Stainless steel or aluminium surfaces should be cleaned with hot soapy water or
a good quality metal cleaning compound. DO NOT clean surfaces with abrasive
pads or cleaners (e.g. Scotchbrite pads or Jif), as stainless steel and aluminium
surfaces will be damaged.
Glass
All glass should be cleaned using a good quality glass cleaner and a clean
cloth.
DO NOT use abrasive pads or cleaners, because they will damage the surface
of the glass.
Sliding Doors Sliding glass doors are located by plastic guides
at the top and bottom.
The doors can be removed for cleaning by sliding
the door to central position, placing hands either
side of the door, lifting it up and then swinging it
out at the bottom.
When replacing doors, make sure that they are
located in the correct slots, top and bottom. The
left door should be in the inner slots, and the right
door in the outer slots.
Sliding door tracks should be vacuumed out
regularly to keep doors sliding freely.
Continued on next page