FP PostBase, Руководство по установке

Страница: 12 / 16

12
6.3 - Extension Lines: Setting the dialled code
In systems where an exchange digit is
used to get an extension line, the
dialed digit(s) must be entered. This
may be a simple digit, for example, ‘9’
or a more complicated code.
Enter the digit using the
numeric keypad. Sometimes there
must a pause or wait period after the
code has been entered to allow the
telephone system to receive the dialing tone from the outside line. You
can enter such a pause use the ‘P/W’ key.
If you make a mistake, use the CE (bottom right key) to
successively correct the last entries.
That is all the information that is
needed. You will be shown the
confirmation screen (here) and
PostBase will attempt to make a
connection.
If all goes well, PostBase will now continue with the remainder of its
configuration…
If it can’t connect, the wizard will return to its starting point. In this case, you should
first check the connections, then the settings you have entered.
PLEASE NOTE, YOU WILL NEED TO ENTER YOUR MACHINE SPECIFIC
R-PIN
NUMBER INTO THE MACHINE WHEN PROMPTED, THIS CAN BE FOUND IN
YOUR FP WELCOME PACK.