FP HMBox Скачать руководство пользователя страница 16

        

/ FCC / IC proved 

FCC: 

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the 
equipment.  

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. 
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
•—Reorient or relocate the receiving antenna.  
•—Increase the separation between the equipment and receiver.  
•—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
•—Consult the dealer or an experienced radio/ TV technician for help.  
 

IC: 

This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to 
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.  

 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est 
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter 
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 

 

ACHTUNG/ATTENTION: 

Das Gerät min. 20cm vom Körper entfernt bedienen. 

This equipment should be operated with a minimum distance of 20 centimeters between the radiator and your body. 

 

Additional Information 
 

16 

Содержание HMBox



















Отзывы: