FLORIDA-PNEUMATIC.COM
Please contact 1-800-356-3392 for further assistance.
Operation
1
Operating the nut runner
Ƒ
This Nut Runner is designed to operate on 90 PSIG. Low
pressure (below 90 PSIG) will reduce the power output.
Higher pressure (over 90 PSIG) raises the tool performance
beyond its rated capacity and could result in serious
damage to the tool and/or operator.
Ƒ
Press trigger to run tool.
2
Changing the output torque direction
Ƒ
This tools features the reverse switch to change the
output torque direction to tighten (assemble) or loosen
(disassemble) the bolt or fastener. Control the output torque
direction by turning the reverse switch to the F (Forward)
or R (Reverse) position to change the direction.
3
Installing and removing the sockets
WARNING:
Disconnect the tool from air the supply before
servicing or changing accessories.
To install the sockets:
Ƒ
Disconnect the tool from the air source.
Ƒ
Select the suitable and desirable socket size.
Ƒ
Press fit the anvil into the socket.
To remove the impact socket:
Ƒ
Disconnect the tool from the air source.
Ƒ
Use your hand or suitable tool to remove the socket.
4
Tightening or loosening the bolt or
fastener
Ƒ
Fit the socket in.
Ƒ
Hold the nut runner with one hand.
Ƒ
Use the tool to tighten or loosen the bolt or fastener.