Operating Instructions
www.foxunhd.com
use ASCII
6.2.4 Set IP Button
1way select automatically obtain address.
2 way:select use the following IP address
Then write the codes to the matrix.
6.5 IR Matrix
In this menu,you can select the IR-RX channel to
control sink. Click this button to write the codes onto the device.
(Right fig:IR-RX 1 channel control all sink over UTP
output)
7 the Com status
7.1 connect state.
Connect state shows the com open or not. If it is open, the state is green. Otherwise, the state is red.
7.2 com select.
Select which com you will use.
Connect button.
The word on this button will change when the connection state changes. If the word is “Disconnect”,
then click this button, the com will be closed. If the word is “Connect”, then click this button, the com
will be opened.
8.NET Control
