Operating Instructions
www.foxunhd.com
Local IR remote control.
①
Press "M" button to switch to "DIP Switch" mode for EDID Setting.
②
OUTPUT-X select INPUT-Y:
A. Press OUTPUT-X (X means 1 to 4 of outputs) Press INPUT-Y (Y means 1 to 4 of inputs)
B. Press OUTPUT-X (X means 1 to 4 of outputs), Press the left and right arrow buttons to select the input.
③
All outputs select INPUT-Y: Press ALL button in zone OUTPUT Press INPUT-Y button (Y means 1 to 4
of inputs), then INPUT-Y switched to ALL OUTPUTS.
④
Mirror all inputs and outputs (Ex. Input 1 to output 1, input 2 to output 2, etc): Press PTP button in Zone
OUTPUT.
DIP Switch for EDID Setting
Press “M” button, switch to “DIP Switch” mode to choose the EDID.
