Front Panel
Rear Panel
Power ON/OFF
Status indicator lamp:The LED will illuminate when the HDMI equipment is connected.
Power indicator lamp:The LED will illuminate when the power is on.
Reset key
Power input port
RS232 port
1
2
3
4
Ethernet port Output1 port ( Ethernet,RS232 &IR pass-though)
Output2 port ( IR pass-though)
1
2
3
4
5
6
HDMI input port
Connecting and operating
1) Connect the HDMI input sources into HDBaseT splitter.
2) Connect HDMI receiver over Cat5e/Cat6 cables to both the Cat5e/6 port of HDBaseT Splitter
and Cat5e/6 port of Receiver,The RJ45 connections must follow EIA-TIA 568b standards.
3) Connect the HDMI output from the Receiver(RX) into the display HDMI input.
4) Connect the IR TX receiving cables into splitter IR TX port on the back panel and affix the
emitter onto the source IR windows. .
5) Connect IR-RX cable into IR-RX port on the receiver and affix the IR receiver in direct line of site
with the handheld remote control.It is recommended to affix the receiver on the display frame
/bezel or the display stand.
Note
：
Do not affix the emitter until the placement is tested.
6) Power up all units, the splitter,Receiver
,
sources and displays.
RS-232 pin assignment
HDBaseT Splitter
PIN
Assignment
1
NC
2
TX
3
RX
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
7) To get on the ethernet,pls connect as below steps:
1.Connect ethernet cable into ethernet port on HDBaseT splitter.
2.Connect ethernet cable with TV and ethernet extender receiver
Note:1.The ethernet function is designed for ethernet compatible receiver units only.
2.Only output1 with ethernet function.
8) Copy EDID function
Copy the EDID of the sink which connected the OUTPUT1,it is suggested to put lowest or
the most compatible display specification on output1.
For example:
One SDTV(480p) ,one HDTV(1080p), in order to make the 2 TV work, you need to put the
SDTV is connected to the output 1 .
HDMI cable
Output1
Ethernet cable
Smart TV
HDTV
HDMI cable
HDMI cable
Computer RS232 port
PIN
Assignment
1
NC
2
RX
3
TX
4
NC
5
GND
6
NC
7
NC
8
NC
9
NC
RS232 cable
Router
Internet
