9
Starting to Drive
Getting Started
Check list
Please check the following before moving
•
You
must fully charge the batteries prior to first use. ('See Batteries and Charging')
•
Select a space.
•
Mount the scooter by lifting the arm and sliding into the seat.
•
Ensure the seat is securely locked in the forward position before driving.
•
Adjust the tiller and seat if necessary. (See 'Adjustments')
•
Do not use the tiller to fully support you during transfer.
The scooter’s speed and direction are controlled by the
wig-wag' lever. The arrows shown in the image above
show the direction in which the scooter will move when the lever is operated as indicated
Moving Off
Insert the key and switch on the power. Start by setting the speed control to a low setting. The further you pull
the lever the faster the scooter will travel, but only to the maximum speed that has been selected. Release the
lever and the scooter will come to a smooth, controlled stop.
Caution:
DO NOT switch off the power to stop the scooter as this will cause the transmission to lock and the scooter will
come to a sharp stop, which could possibly cause injury. This procedure should only be used in an emergency.