Foxtel iQ2, Руководство пользователя, Страница: 20 / 48

20
FOXTEL Macro
When in AV mode, the FOXTEL button on the iQ2 Remote can be programmed
to initiate a series of commands before sending the FOXTEL command. This can
be used to change an input of your television or HDMI switcher, or change
another TV function, prior to entering FOXTEL mode.
To activate the FOXTEL Macro:
11..
Press aavv button on the FOXTEL iQ2 Remote.
22.. Press and hold the sseelleecctt button, then press and hold the rreedd button. Keep
both buttons held down until the LED on the FOXTEL iQ2 Remote flashes
twice
33..
Press 99 99 55.
44.. Press the ffiirrsstt ccoom mm maanndd bbuuttttoonn you wish to use.
55.. Press the sseeccoonndd ccoom mm maanndd bbuuttttoonn you wish to use.
66.. Press the tthhiirrdd ccoom mm maanndd bbuuttttoonn you wish to use.
77.. Press the ffoouurrtthh ccoom mm maanndd bbuuttttoonn you wish to use.
88.. Press sseelleecctt, the LED will flash twice.
When the FOXTEL Macro is set and the FFO OXXTTEELL button (from av mode) will sends
all the commands programmed in the sequence above.
To deactivate the Power Macro:
11.. Press aavv button on the FOXTEL iQ2 Remote.
22.. Press and hold the sseelleecctt button, then press and hold the rreedd button.
Keep both buttons held down until the LED on the FOXTEL iQ2 Remote
flashes twice
33..
Press 99 99 55..
44..
Press sseelleecctt, the LED will flash twice.
When FOXTEL Macro is deactivated the FFO OXXTTEELL button (from av mode) it will
return to the default single function mode.
Note:
• Not all command buttons need to be used. i.e. you can use only 2 command
buttons if desired.
• FOXTEL Macro can be used with Learning Functionality to control devices that
are not in the code list of the iQ2 remote.
• If a new Television Code is programmed into the iQ2 remote the, FOXTEL
macro will be deactivated.
FOXTEL_F120_New_RDN-2310708:FOXTEL_PVR_opmaak 31-07-2008 16:15 Pagina 20