9. Use the
Left/Right
arrow keys to select the desired Wifi network (e.g. “biq”), then press the
OK
key.
Note: The quality must be a minimum of 50 for correct operation.
10. Use the
Up/Down
arrow key to select the
Password
option, then press the
OK
key
11. Enter the password for the Wifi network (e.g. “fox024@?”) using the
Left/Right
arrow keys to select characters followed by the
OK
key to add the
character to the password. When finished use the
Left
arrow key to select the
ACCEPT
button and press the
OK
key.
* Press Up to get uppercase letters, Press Down to get back to lower case
12. Press
Down
arrow to select the
Connect
button and press
OK
. The SBB shall attempt to connect to the Wifi network and if successful
“Connected” shall be displayed at the top of screen. If the SBB does not connect, please repeat the above steps and confirm the information entered is
correct.
13. Press the
Exit
key twice to exit the hidden menus. The boot screen should display followed by the in-room installation screen (see next page).
13
