Foxtech Pixhawk V3, Быстрый старт

Страница: 5 / 5

单击 Proximity 按钮，进入雷达预览界面。（如下图）
Click the ‘Proximity’ button to enter the radar preview interface.(as shown below)
检查雷达扇区内移动物体侦测情况，确认雷达工作正常，前方红色弧线代表前方物体侦测情况。若无数据
请检查 6 Pin 线与雷达 TX/RX 线序，交叉连接雷达的 TX 与 6 Pin 线的 RX，雷达 RX 与 6 Pin 线 TX 连接。
Check the detection status of moving objects in the radar sector to confirm that the radar is
working normally. The red arc represents that radar detected the object and works well. If there
is no data, please check the 6 pin wire and radar TX/RX wire sequence, connect the radar TX
with 6 pin wire RX, and the radar RX with 6 pin wire TX.
6. 返回 Mission Planer 首界面 按下 Ctrl+F 调入菜单（如下图）
Return to the first interface of Mission Planner, press Ctrl+F to enter the menu.(as shown
below)
注意：软件调试每一步需要点击写入参数！
Note: Please click to write parameters in every step of software debugging!
4