FH314
User Manual
©
2019 FOXTECH All Rights Reserved
4
3. Please keep the lens clean and wipe it with a clean glasses cloth. The lens is too dirty or causes the focus
to slow down or even can’t focus etc.
4. Do not pull out the Micro SD card during taking pictures or recording, otherwise the images obtained
during shooting may be lost.
5. Do not disassemble or repair it yourself, otherwise you will not be able to enjoy the warranty policy.
6. The Argus pod needs to cooperate with the data link to be used normally. Please use and install correctly.
Otherwise, the pod will not work properly or even burn out.
Product Brief Introduction
Installation
The Argus optical zoom pod adopts 3.5x optical zoom lens, a 1/2.3 CMOS sensor, and has 12 million
effective pixels, and a high-precision 3-axis gimbal with target tracking function. Can be widely used in
inspection, survey, monitoring and other fields.
1. reparation for installation
Supported device types
Argus pods can be used with the Rainbow R1S data link, network video link, or other third-party network
video link to display images on the ground PC, tablet ipad, and mobile phone (Android), and realize
zooming and taking pictures. , recording video, gimbal moving and other controls. (third-party network video
link needs to support USB hotspot sharing or WiFi, then it can be used on mobile phones).
Work together with flight controller (support for TOPXGUN series flight controllers) can get higher pointing
accuracy and heading drift can be suppressed. At the same time, information such as GPS of the flight
control can be written into the photo or video information.
If not connect to the flight controller, the information writing function such as GPS will be lost, but other
functions can still be used normally.
2. Supported Micro SD card type
Supports up to 128GB. Please use a Micro SD card of Class 10 or UHS-1 and above to ensure normal video
recording.
3. Install the Gimbal
1.Aim the Argus pod slideway at the quick released slideway of the IDU gateway shock absorber plate and
then push in.
2.When hear a click , the locking mechanism is locked and the installation is completed (locking standard:
as shown in the figure below, can fully see the triangular arrow ).
3. Install the Micro SD card to the camera. A standard Micro SD card is recommended