Foxpro Scorpion X1A, Инструкция по эксплуатации

Страница: 10 / 26

10
reversed, an internal protection diode within the FET will conduct, causing the device to stay on
constantly. The maximum voltage applied to this jack must never exceed 15 volts. Typical uses
for this jack would be to control the FOXPRO Black Jack or Jack-Attack Decoy, or to start and
stop a video recorder. Instructions on connecting various devices to the “AUX” jack are beyond
the scope of this manual. You are urged to seek help from a knowledgeable professional before
connecting any unapproved device to this jack. Remember that damage to your Scorpion X1A
caused by improper use of the “AUX” jack is not covered by the warranty, nor will FOXPRO be
liable for damage to any device connected to this jack.
4. Using External Speakers
The Scorpion X1A is equipped with two External Speaker Jacks, which allows you to connect up
to two additional speakers. The internal Mylar cone speaker performs admirably; however, you
may encounter situations that require higher sound levels. By connecting a larger external
speaker(s) to the Scorpion X1A, the volume level can be increased significantly. The external
speaker jacks on your Scorpion X1A accept a standard 3.5mm plug. When choosing an external
speaker it is recommended to use one with an impedance rating of 8Ω.
4-1 Connecting an External Speaker
Make sure that the Scorpion X1A is turned off before connecting an external speaker. Plug the
connector of the external speaker into one of the two external speaker jacks (see image below).
Connecting an external speaker to the Scorpion X1A does not automatically disconnect the
internal speaker. You may want to let it play, although battery life will be better if you disable
the internal speaker. If you wish to have only the external speaker(s) produce sound, perform
the following steps.