Page | 30
BLASTER appears in the right vertical column labeled “Caller Sound Files”.
You will now notice that a new button appears above the Select Device
window that reads “Backup”. If you have not made a backup of your sounds,
simply click on this button. The programmer by default will backup your
sounds to a “FOXPRO” folder, and a sub folder “Backup”. This is also a
good folder to use to add new sounds prior to adding sounds, or
reprogramming your PRAIRIE BLASTER. You can also create sub folders
for different species, if you choose, rather than to have all sounds located in
one folder. Once your backup is complete, you are ready to reprogram your
PRAIRIE BLASTER.
4. Select the “source” folder of your new sounds (located on the left hand
side of the programmer screen). This is the folder where your sounds
are located. By default, the FOXPRO Programmer will access the
C:\FOXPRO\Sounds folder. If this is not the folder that your sounds
are located in, select the proper folder by using the directory selector
on the far left side of the screen.
5. Once the proper folder is selected, the sounds will appear in the left
side column, called “Source Sound Files”.
6. Now, determine the position that you would like to add new sounds to
your PRAIRIE BLASTER. For example, if you would like to add the
Jackrabbit Distress to your PRAIRIE BLASTER, highlight that sound in
the left side column.
NOTE:
If this sound does not have a three digit number and a space
located at the beginning of it, you must check the Append Sound Number
box located below the left column. By selecting this box, the sound name
will not be shortened. If there is a three digit number and a space before the
name of the sound, there is no need to check this box. The first four
characters will be either truncated or ignored, by not selecting this box.
7. Select the position in the right column where you would like to add the
sound. If you want to overwrite the sound in that position, then click on
the overwrite box, located between the two columns. This will replace
the current sound in that position. Otherwise, use the Insert button to
insert at that position.
NOTE:
The sound that was located in that position will be deleted. If you
choose to insert the sound in that position and move all other sounds down
one, click the insert button. This will add the sound in that position and not
overwrite the current sound. If you would like to remove sounds from the
right side column before adding new ones, simply highlight the sound, and
click on the “Remove From List” button, located between the two columns.
If you would like to relocate a sound in the right sound column, you can high
light the sound and then type the position number that you would like to move it
