6
With the FOXPRO game call and TX1000 both powered-on, you can start using FOXGRIP
II
. Push
button 1 or button 2 during normal operation. Watch the TX1000 closely to see it react to the
FOXGRIP
II
command—you should notice the FB/FG indicator on the top status line blinking
after it has successfully received a signal from FOXGRIP
II
. You should also observe the FOXPRO
game call reacting to the button press by performing the feature you have mapped to that
particular button.
3.
TX505 Instructions
This section covers using the FOXGRIP
II
with the TX505 remote control. It is important to note
that
only button 1 is configurable with the TX505 remote control
. Button 2 will only ever
trigger preset 1. Keep this in mind while setting up FOXGRIP
II
. Button 1 can be assigned to any
of the following features:
•
Auxiliary
•
Preset 1
•
Preset 2
•
Toggle mute
3-1
Compatibility
Before continuing through this section, it is important to make sure that you have a TX505
remote control. The TX505 is featured with the following FOXPRO digital game calls: Fury 2,
Prairie Blaster 2, CS24B, and newer Krakatoa models. If you have an original TX500 remote
control, FOXGRIP
II
will not work with it. Please contact the sales team for purchasing a TX505
remote control at: 866-463-6977.
3-2
Pairing the FOXGRIP
II
with the TX505
Make sure that the TX505 has fresh batteries installed prior to performing these steps.
1.
Turn on the TX505 remote control.
2.
Access the main menu by holding down the selector knob for about 2-3 seconds.
3.
Enter the “FOXBANG/FOXGRIP” menu.
4.
Select “FOXGRIP OPTIONS”.
5.
By default, Fox Grip is turned off. At this stage, you must decide which function you
would like button 1 to be assigned to. Remember, button 2 triggers preset 1 by
default. Select the option you wish to assign to button 1, highlight it, and push down
on the selector knob a single time to lock it in.
6.
Exit all menus and return to your sound list display.
7.
Push button 1 on the FOXGRIP
II
a single time. The display on the TX505 shows:
“FOXGRIP PAIRING MENU”. Select “YES” to allow the TX505 to be paired with
FOXGRIP
II
.
Содержание FOXGRIP II
Страница 1: ......
