12
If you had the previous version of the utility installed, your default sound library storage point is
located at "C:\FOXPRO\Sounds". By clicking on the "Browse Library" button you can browse the
sound files stored at that location.
If this is a fresh install (no previous versions), your default sound library storage point is located
under your Documents (or My Documents) folder\FOXPRO\Sounds. By clicking on the "Browse
Library" button, you can browse the sounds stored at that location.
Your sound library will probably be empty by default. You need to obtain sounds and place
them into your library folder in order to install them into your FOXPRO game call.
The Programming Process
1.
Turn off the game call.
2.
Connect the game call to the PC
3.
Launch the programming utility
4.
If you do not see your new sounds under the "Source Sound Files" column, use the
"Browse Library" button to navigate to the correct location. When the appropriate
files are found, double-click on any of the sounds to automatically load all files from
that location.
5.
Select one, multiple, or all sound files in the "Source Sound Files" column. Click on the
position you wish to load the sounds into on the right column and click "Insert". Or if
you are replacing existing sounds, use "Overwrite".
6.
When complete, click on the "Update Caller" button to save your changes. Any sounds
being removed will automatically be backed-up.
7.
Exit the utility and update your remote control as per the instructions in the next
section.
6-3
Transferring a New Playlist to the TX35
Now that you are done programming your Cabela’s Outfitter Series Electronic Predator Call, you
are ready to download the new playlist to the TX35 transmitter. You will need to obtain a
3.5mm male-to-male stereo patch cable for this process.
1.
Disconnect all accessories from the game call (i.e. speakers or decoy)
2.
Turn off the power for both the game call and the TX35.
3.
Connect the patch cable from the sound upload jack on the TX35 to the AUX jack on
the game call.
4.
Turn on the TX35
5.
After powering on, the TX35 will display “TURN ON CALLER”
6.
Turn on the game call.
7.
The display on the TX35 will display “TRANSFERRING DATA”. When it’s done, the
display will say “REMOVE CABLE HOLD SEND”.
Содержание Cabela's Outfitter Series
Страница 1: ......
