·Service bypass on Alarm and Anti-Hijack functions to
prevent operation disclosure
·Randomly encrypted Transmitters with over 18 billion
code permutations
·Two compact 4 button Transmitters supplied
·Only the owner controls Transmitter duplication or
replacement
·Unauthorised Transmitter duplication is impossible
·Transmitters have low battery warning and an
auto turn off feature
·Auto learn function of up to 6 Keying Slave
Transmitters
·Selective Central Locking (Optional)
(Drivers door always operates, with
separate control of passenger doors)
·Auto door locking and/or unlocking when ignition is
turned ON or OFF (Optional)
·Intelligent High Bright dash LED indicates various
modes and alarm memories
·System will retain all conditions when the vehicles
battery is disconnected
FOX 555 - PAGE 03 - REV 1
Service Mode
To disable hi-jack sensors when the vehicle is taken for a service at a
dealership, so that you don’t have to reveal the position of the anti hijack
button to someone else. While the ignition is switched on press the
button for 10 seconds, the siren and indicators will sound and flash 4
times. The vehicle is now in service mode. Every time the ignition is
switched on the siren will sound once to indicate service mode. No alarm
will sound but instead just a remote immobiliser is active. Follow the
same procedure as above to take out of service mode.
Anti Hijack
( Optional )
There are two types of Anti Hijack
(
programmable
)
Door Hijack ( Default )
Hijack will only be activated when a door is opened and the
brake was not pressed.
Forced Hijack
Every time the ignition of the vehicle is turned on , anti hijack
will be activated. Also if a door was opened and the brake was
not pressed.
If anti hijack is activated the LED on the ultra sonic sensor will flash
twice to indicate anti hijack sequence will start in 30 seconds. You will
receive a warning: indicators will flash then indicators will flash while
siren sounds for 30 seconds. After another 30 seconds the system will cut
the ignition and will be in full hijack mode. To clear anti hijack, press
hijack button for 2 seconds. If the anti hijack sequence is canceled the
LED on the ultra sonic will flash 6 times. To prevent activation of the anti
hijack sequence every time a door is opened, just step on the foot brake
before a door is opened. If door is closed and foot brake is
released , the
doors will lock ( if fitted with central locking ) and Anti Hijack will
not be triggered.
Your Remote
FOX 555 - PAGE 06 - REV 1
