Foxfury Lighting Solutions 480-L06, Руководство по эксплуатации продукта

Страница: 6 / 12

6
ON/LOW mode: Press the Power/Mode switch once. All 3 LEDs will turn
on.
HIGH mode: From LOW mode, press the Power/Mode Switch once. All 3
LEDs will increase in brightness. From HIGH mode press once more to
turn headlamp OFF.
NOTE: All P/Ns listed above will power OFF after HIGH mode. When ON (for all
modes), the rear LED (located on Battery Pack) will flash.
DISCOVER TILT & LO • PRO BATTERY LIFE
MODE BATTERY LIFE LUMENS
HIGH POWER 5 hours 200
LOW POWER 12 hours 54
*Battery life may vary according to mode selected, battery quality & type, and prevailing
ambient conditions.
BATTERY CORROSION
Battery leakage may cause corrosion to build inside the Battery Pack, causing
the light not to function properly. In case of corrosion, please follow the
suggested steps below:
1. Remove the batteries from the Battery Pack.
2. Make a mixture of 50% vinegar and 50% water. Then, pour the mixture into
the Battery Pack and let it soak for five (5) minutes.
3. Drain the mixture from the inside the Battery Pack. Dry the inside of the
Battery Pack (make sure no liquid residue is left inside Battery Pack).
4. Re-install all four (4) batteries. Test the light’s performance.
5. Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs.
NOTE: Corrosion from leaking batteries is NOT covered by the warranty.
OPERATIONAL MODES
MAINTENANCE
1
2
3
4
5