Foxfury Lighting Solutions 480-331, Руководство по эксплуатации продукта

Страница: 5 / 12

5
BATTERY INSTALLATION AND REPLACEMENT
Unlock both two (2) of the Battery Cover Tabs.
Insert two (2) 18650, four (4) CR123, or four (4) RCR123 batteries.
Reference the plus (+) and minus (-) symbols located on the ridge of the
Battery Pack for proper installation. (Image shown above is with two
18650 batteries.)
Once batteries are installed, test the light’s performance by activating the
Power/Mode Switch. If the light does not turn on, push the POWER/KILL
SWITCH once and try again. If the light still does not turn on, please make
sure that the batteries are inserted correctly
Secure the Battery Cover by snapping both (2) Battery Cover Tabs. A
‘click’ should be heard as the snaps are shut.
NOTE: Make sure the Battery Cover is properly closed to maintain a
water tight seal.
BATTERIES
The Taker B30 uses two (2) 18650, four (4) CR123, or four (4) RCR123.
Do not mix used and new batteries, different battery brands, or different
types of batteries as this could damage your product or cause battery
leakage or explosion.
1
2
3
4
1 2
–
+
+
–