10
7.2 Clearance
Make sure to leave a space of at least 300 mm. A clearance of at least 300 mm must be Ieft around the
battery pack for proper cooling.
Note: Make sure that the battery pack is always exposed to the ambient air. The battery pack is cooled by
natural convection. If the battery pack is entirely or partially covered or shielded, it may cause the battery
pack to stop operating.
7.3 Tools
The following tools will be required to install the BMS BOX and the battery.
Screw Driver Crimping Modular Safety Shoes Multimeter
Safety Gloves Safety Goggles Plier Ribbon