Appendix
100
Appendix
USB Charger Introduction
If your Operating System does not support charging mode, USB Charger can provide you ad-
ditional convenient way to support the battery charging function, with this, you can charge devices
that comply with the BC1.2 specifications, such as ipad, ipod, iphone, etc.
Setup Guide
1. Check the “Deep Sleep Mode” in BIOS is set as “Disabled”, and the “USB Standby Power” is
set as “Enabled”.
2. Connect the USB header (F_USB2) correctly, then you can use the front expansion USB port
to charge up your devices when your system is in ACPI S3, S4 or S5 state.
If there are system state transitions during charging, such as S5 to S3 and so on,
the devices must be re-plugged to continue the charging process.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
ACPI Configuration
ACPI Sleep State
[S3 (Suspend to RAM)]
Lock Legacy Resources
[Disabled]
S3 Video Repost
[Disabled]
High Precision Event Timer
[Enabled]
Restore on AC Power Loss
[Power Off]
Deep Sleep Mode
[Disabled]
USB Standby Power
[Enabled]
Resume By RTC
[Disabled]
Wake on USB Device
[Enabled]
Wake on PCI/PCIe device
[Enabled]
Wake on PS/2 KB from S1 and S3
[Enabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Advanced
