Foxconn Rattler, Руководство пользователя, Страница: 36 / 111

3
29
SATA Configuration
SATA Configuration
► SATA Mode
This item is used to set the operating mode of your SATA ports. Setting options: [IDE Mode];
[AHCI Mode]; [RAID Mode].
[IDE Mode] - This configures the SATA ports to support IDE mode.
[RAID Mode] - When you enable RAID, it means all your SATA drives must also support AHCI.
[AHCI Mode] - The Advanced Host Controller Interface (AHCI) specification describes the reg
-
ister level interface for a Host Controller for Serial ATA. The specification includes a description
of the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports AHCI,
then you can select IDE option to have fair performance (only PATA, SATA level), or you can
select AHCI to get its best performance.
► Aggressive Link Power Management (Appears when “SATA Mode” is set to [AHCI
Mode])
The SATA controller supports auto-generating link requests to the partial or slumber states
when there are no commands to process. This item is used to enable or disable this function.
When enabled, the SATA controller will aggressively enter a lower link power state (partial or
slumber) based upon the setting of the ASP bit (bit 27).
► Serial-ATA Controller 0 (Appears when “SATA Mode” is set to [IDE Mode])
Serial-ATA Controller 0 are the SATA ports 1, 2, 3, 4 of the motherboard. This item allows you
select the mode of the SATA ports. Setting values are: [Disabled], [Compatible], [Enhanced].
► Serial-ATA Controller 1 (Appears when “SATA Mode” is set to [IDE Mode])
Serial-ATA Controller 1 are the SATA ports 5,6 of t he motherboard. This item allows you select
the mode of the SATA ports. Setting values are: [Disabled], [Enhanced].
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
SATA Configuration
SATA Mode [AHCI Mode]
Aggressive Link Power Management [Enabled]
SATA Port 0 Not Present
Staggered Spin-up [Disabled]
External SATA Port [Disabled]
Hot Plug [Disabled]
SATA Port 1 Not Present
Staggered Spin-up [Disabled]
External SATA Port [Disabled]
Hot Plug [Disabled]
SATA Port 2 Not Present
Staggered Spin-up [Disabled]
External SATA Port [Disabled]
Hot Plug [Disabled]
SATA Port 3 Not Present
Staggered Spin-up [Disabled]
External SATA Port [Disabled]
Hot Plug [Disabled]
→ ← : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
(1) IDE Mode. (2) AHCI Mode
(3) RAID Mode.
Advanced