Serial ATA RAID User’s Guide
3
2. Installing SATA Hard Disks
STEP 1: Install two SATA hard disks into the drive bays at least.
STEP 2: Connect one end of the SATA data cable to the motherboard’s one of
SATA connectors.
STEP 3: Connect the other end of the SATA data cable to one SATA hard disk.
STEP 4: Connect one end of the second SATA data cable to the motherboard’s
the other of SATA connectors.
STEP 5: Connect the other end of SATA data cable to the other SATA hard disk.
3. BIOS Configuration
1. Enter the BIOS setup program by pressing the <Del> key during the POST
(Power-On Self Test ).
2. Select the
OnChip IDE Device
item form
Integrated Peripherals
menu.
3. Switch the
SATA Mode
option to
[RAID]
.
4. Save the BIOS setting and exit the BIOS setup program.
4. RAID Configuration Utility
A. Setting RAID 0
a. When the system powers on, the following information will appear on screen:
Press the <Ctrl-I> to enter RAID Configuration Utility.
At this moment, press <Ctrl>+<I> to enter Main Menu:
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５
2004-12-15, 9:04
3
