background image

5

88

6. Use Up or Down arrow key to select the desired strip size when entering “

Strip 

Size

” menu. The default value is 64K. Press <Enter>.

7. In “

Capacity

” item, use the default value, and press <Enter>. The default value is  

twice that of the smallest hard disk size, that is, 74.5GB * 2 = 149GB.

8. Select “

Create Volume

” and press <Enter>. A warning message will appear : 

  Press <Y> to create the volume and return to the main menu.

    

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

    Are you sure you want to create this volume ? (Y/N) :

          

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

                    Copyright(C) 2003-04 Intel Corporation All Rights Reserved.

   

  

   

  

 

 

 

 

The following are typical values:

   

  

 

 

RAID0   -  128KB

   

  

 

 

RAID10 -  64KB

   

  

 

 

RAID5   -  64KB

 

Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021                 

Copyright(C) 2003-09 Intel Corporation.   All Rights Reserved.

Name:  

RAID Level:

Disks:

Strip Size:

Capacity:

Sync:

  TryRAID5
  RAID5(Parity)
  Select Disks
   128K

   149.1   GB

   

N/A

  Create Volume

               [↑↓]-Change      [TAB]-Next      [ESC]-Previous Menu      [ENTER]-Select

[

 

HELP

 

]

64KB

CREATE VOLUME MENU 

]

          

Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5

                    Copyright(C) 2003-04 Intel Corporation All Rights Reserved.

   

 1. Create RAID Volume  

 

4. Recover Volume Options

   

2. Delete RAID Volume 

 

5. Acceleration Options

   

3. Reset Disks to Non-RAID   

6. Exit

 
   

  

 

 

 

 

  RAID Volume : 

 

 

 

  ID 

Name 

 

Level                 Stripe 

Size  Status            Bootable

  0 

TryRAID5 

 

RAID5(Parity)     64KB  149.1GB 

Normal

                Yes

  Physical Disks:
  Port  Drive Model   

Serial # 

Size 

Type/Status(Vol ID)

  0 

Hitachi HDS72161 

PVF904Z21G2JZM 

149.0GB 

Member Disk(0)

  1 

ST380811AS   

5PS1TAGW 

74.5GB 

Member Disk(0)

  2 

SAMSUNG HD161HJ

  S0V3J9APA30524 

149.0GB 

Member Disk(0)

  3 

ST380815AS   

5RW1CA37

 

74.5GB 

Non-RAID Disk

 

Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1021                 

Copyright(C) 2003-09 Intel Corporation.   All Rights Reserved.

[

 

DISK/VOLUME INFORMATION

 

]

[

 

MAIN MENU

 

]

1. Create RAID Volume

                  [↑↓]-Select                        [ESC]-Exit                       [ENTER]-Select Menu

Содержание P55MX Series
















































































































Отзывы: