background image

2

13

2-3 Install an expansion Card

Follow the steps below to correctly install your expansion card in the expansion slot.
1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis 

back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.
3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover(s).
6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for 

your expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Installing and Removing a PCI Express x16 Graphics Card :

Installing a Graphics Card

Gently insert the graphics card into the PCI Express x16 slot. Make 
sure the graphics card is locked by the latch at the end of the PCI 
Express x16 slot.

Removing the Card:

Press the white latch at the end of the PCI Express x16 slot to 
release the card and then pull the card straight up from the slot.

PCI Express x16

PCI Express x1

 

PCI

■     Make sure the motherboard supports the expansion card. Carefully read the manual 

that came with your expansion card.

■ 

Always turn off the computer and unplug the power cord from the power outlet before 

installing an expansion card to prevent hardware damage.

CA

UT

IO

N

!

Содержание P35A Series






















































































































Отзывы: