Foxconn K8M890M2MA Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 69

background image

Chapter 2 Installation Instructions

14

Expansion Slots

This motherboard includes two 32-bit master PCI bus slots, one PCI Express x1
slot,one PCI Express x16 slot.

PCI Slots

The expansion cards can be installed in the two PCI slots. When you install
or take out such cards, you must make sure that the power plug has been pulled
out. Please read carefully the instructions provided for such cards, and install and
set the necessary hardware and software for such cards, such as the jumper or
BIOS setup.

Installing an expansion card

1. Before installing the expansion card, read carefully the documentation that

came with it and make the necessary hardware settings for the card.

2. Make sure to unplug the power cord before adding or removing any expan-

sion cards.

3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is

completely seated in the slot.

5. Secure the card to the chassis with the screw you removed earlier.

For the detailed AGP graphics cards support list on this motherboard, please
visit the website:

http://www.foxconnchannel.com

PCI Express x1 Slots

This motherboard has one PCI Express x1 slots that designed to accommo-
date less bandwidth-intensive cards, such as a modem or LAN card.

PCI Express x16 Slots

This motherboard has one PCI Express x16 slots that reserved for graphics or
video cards. The difference in bandwidth between the x16 and x1 slots is no-
table to be sure, with the x16 slot pushing 4GB/sec (8GB/sec concurrent) of
bandwidth, and the PCI Express x1 slot offering 250MB/sec.

PDF

文件使用

"pdfFactory"

试用版本创建

www.fineprint.com.cn

«
...
19
20
21
22
23
...
»

Содержание K8M890M2MA






































































Отзывы:

Нет отзывов

Похожие инструкции для K8M890M2MA

Бренд: IEI Technology Страницы: 126

Бренд: JETWAY Страницы: 39

Track bq27520EVM

Бренд: Texas Instruments Страницы: 22

Бренд: JETWAY Страницы: 48

Бренд: Honda Страницы: 692

H470 AORUS PRO AX

Бренд: Gigabyte Страницы: 52

Бренд: Maxtang Страницы: 13

Бренд: Gigabyte Страницы: 112

Бренд: Texas Instruments Страницы: 17

Бренд: SELVA MARINE Страницы: 35

Бренд: Seco Страницы: 49

Бренд: Aeroflex Страницы: 32

Бренд: EPOX Страницы: 55

Бренд: Advantech Страницы: 6

A320M gaming pro

Бренд: MSI Страницы: 20

Бренд: DFI Страницы: 113

Бренд: DFI Страницы: 75

Бренд: Analog Devices Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды