background image

BIOS SETUP

34

boot

    

    

 
 

Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility  -  Copyright (C) 2012 American Megatrends, Inc.

  Main  F-Center Advanced  Boot  Power  Health  Security  Save & Exit

Boot

 

Boot Configuration 

  

 

Bootup Numlock State                 [On]

 

Quiet Boot                           [Enabled]

  Interrupt 19 Capture

                 

[Enabled]

 

Set Boot Priority

 

1st Boot                             [Hard Disk]

  2nd Boot                             [Optical Disk]
  3rd Boot                             [Removeable]
  4th Boot                             [Network]
  5th Boot                             [UEFI]

▶ Hard Disk Drive Priority
▶ Optical Disk Drive Priority
▶ Removeable Device Priority
▶ Network Device Priority
▶ UEFI Boot Device Priority

→  ←: Select Screen 
↑  ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values

 

F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Select the keyboard NumLock
state
 

► Bootup Numlock State

 

This item is used to select the keyboard numlock state. The defaulte setting is [On].

► Quiet Boot

 

This item is used to enable/disable the quiet boot. 
[Disabled] : Displays the normal POST messages. 
[Enabled] : Displays OEM customer logo instead of POST messages.

► Interrupt 19 Capture

 

Enable this item can allow Option ROMs to trap Interrupt 19.

► Set Boot Priorities

 

These items are used to set the system boot order.

► Hard Disk Drive Priority

 

Thsi item is used to specify the Boot Device Priority sequence from available Hard Drives.

► Optical Disk Drive Priority

 

This item is used to specify the Boot Device Priority sequence from available Optical Disk 
Drives.

► Removeable Device Priority

 

This item are used to specify the Boot Device Priority sequence from available Removeable  
Drives.

► Network Device Priority

 

This item are used to specify the Boot Device Priority sequence from Network Boot Drives. 

► UEFI Boot Device Priority

 

This item are used to specify the Boot Device Priority sequence from UEFI Boot Drives. 

Содержание H61MXP Series







































































Отзывы: