manualshive.com logo in svg

Foxconn G45M Series, Руководство пользователя, Страница: 46 / 116

Поделиться
Скачать
Foxconn G45M Series Скачать руководство пользователя страница 46

3

39

USB Configuration

 

             

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

USB Configuration

  USB Devices Enabled :   

   

 

   

 

Help Item

        

1 Keyboard, 1 Mouse

 

   

 

 

 

 

 

 

 

Enables support for

  Legacy USB Support  

 

  [Enabled]

 

   

legacy USB

 

USB 2.0 Controller Mode 

[High Speed]    

  BIOS EHCI Hand-Off 

[Enabled]

 

  ► USB Storage Configuration 

[Press Enter]

    ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     F1:General Help         

                                                F9:Optimized Defaults

[Enabled]

 

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB 

keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. The available settings are :

[High Speed] in 480Mbps; [Full Speed] in 12Mbps.

► BIOS EHCI Hand-Off

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI) 

specification, but there are a few features that are not implemented. Microsoft said preliminary 

support for EHCI BIOS handoff will be available in Windows XP SP2.

This item allows you to enable support for OS without EHCI hand-off feature.

This is a workaround for OS without EHCI hand-Off support .

The EHCI ownership change should claim by EHCI driver.

If USB devices are connected to the computer, the following item will appear :

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There 

are many different emulation types of this USB device, such as floppy, hard disk and CDROM 

can be selected.

Содержание G45M Series





















































































































Отзывы:

Нет отзывов