21
Chapter 2 Installation Instructions
1
INTRUDERJ
GND
INTR
Jumpers
This section explains how to setup jumpers. You should read the following
content carefully prior to modifying any jumper settings.
Clear CMOS Jumper: CLR_CMOS
The CLR_CMOS jumper allows you to clear the data in CMOS. The data
includes system setup information such as system password, data, time,
and system setup parameters. To clear and reset the system parameters to
default setup, please do as follows:
The jumpers on the motherboard, pin 1 can be identified by the
bold silkscreen next to it. and in this manual, pin 1 is simply la-
beled as
“
1
”
.
Attention
1. Turn off the computer and unplug the power cord from the power supply.
2. Move the jumper cap from pins 2-3 (default) to pins 1-2. Keep the cap on
pins 1-2 for several seconds, then move the cap back to pins 2-3.
3. Plug the power cord and turn on the computer, press <Del> to enter BIOS
setup during POST to load defaults.
CLR_ CMOS
Clear CMOS Jumper
Chassis Intruder Connector
Normal
(default)
1
1
Clear
文件使用
"pdfFactory"
试用版本创建
