manualshive.com logo in svg

Foxconn A7VA Series, Руководство пользователя, Страница: 34 / 105

Поделиться
Скачать
Foxconn A7VA Series Скачать руководство пользователя страница 34

3

27

Fox Intelligent Stepping

► CPU Clock Adjust

This option is used to adjust the CPU clock.

► PCIE Clock Adjust

This option is used to adjust the speed of PCI Express slot. It may enhance the graphics card
speed.

► CPU Multiplier Adjust

This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be valid if 
your CPU ratio is unlocked and will be displayed only if your CPU is supporting this feature.

► Memory Speed Mode

This item is used to enable/disable provision of DRAM timing by SPD device. The Serial
Presence Detect (SPD) device is a small EEPROM chip, mounted on a DDR2 memory

module. It contains important information about the module's speed, si��e, addressing mode 

and various other parameters, so that the motherboard memory controller (chipset) can better 
access the memory device. 
Select [Auto] for SPD enable mode.

Select [Limit], the DRAM speed will not exceed the specified value listed in the "Memory 

Speed Adjust" item. If SPD value is faster than "Memory Speed Adjust" value, it will run at the 

specified "Memory Speed Adjust" speed. Otherwise, SPD value is selected.

Select [Manual], then DRAM speed is manually selected according to the set value of 
"Memory Speed Adjust".

► Memory Speed Adjust

This item will appear only when the "Memory Speed Mode" is set to [Limit] or [Manual].

The available settings are : [400MH��], [533MH��], [667MH��], [800MH��], [1066MH��].

[1066MHz] will appear only in AM2+ CPU.

► GFX Engine Clock Override

This item allows you to enable/disable GFX Engine Clock Override support.

► GFX Engine Clock 

This item will appear only when "GFX Engine Clock Override" is set to [Enabled], it allows you 

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.

Fox Intelligent Stepping

   CPU Clock Adjust 

[200] 

   

Help Item

  PCIE Clock Adjust 

[100]

  CPU Multiplier Adjust 

[Auto]

  Memory Speed Mode

[Auto]

Memory Speed Mode 

[Auto]

  GFX Engine Clock Override 

[Enabled]

    GFX Engine Clock 

[350]

   Spread Spectrum 

[Enabled] 

      

   

   

   

        ↑↓←→:Move       Enter:Select          +/-/:Value         F10:Save        ESC:Exit           

              F1:General Help    

 

F9:Optimized Defaults

200

Содержание A7VA Series










































































































Отзывы:

Нет отзывов