manualshive.com logo in svg

Foxconn A7GM Series, Руководство пользователя, Страница: 46 / 107

Поделиться
Скачать
Foxconn A7GM Series Скачать руководство пользователя страница 46

39

3

This item is used to set the transmission rate mode of USB 2.0. The available settings are :

[HiSpeed] in 480Mbps; [Full Speed] in 12Mbps.

► BIOS EHCI Hand-Off

Windows XP supports a number of features in the Enhanced Host Controller Interface (EHCI) 

specification, but there are a few features that are not implemented. Microsoft said preliminary 

support for EHCI BIOS handoff will be available in Windows XP SP2.
This item allows you to enable support for OS without EHCI hand-off feature.
This is a workaround for OS without EHCI hand-Off support .
The EHCI ownership change should claim by EHCI driver.

If USB devices are connected to the computer, the following item will appear:

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There 

are many different emulation types of this USB device, such as floppy, hard disk and CDROM 

can be selected.

SuperIO Configuration

► Onboard Floppy Controller

This item is used to enable/disable Floppy Controller.

► Serial Port Address

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial 
port 1.

► IR Address

This item is used to assign the I/O address and interrupt request (IRQ) for the IR port.

► IR Mode

This item is used to set the IR mode. The available settings are :

[IrDA] : An IrDA device for maximum 115200 bit/s.
[ASK IR] : A faster IrDA for 1152000 bit/s.

► IR Duplex Mode

This item enables you to determine the infrared function of the onboard infrared chip.

CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.

SuperIO Configuration

  SuperIO Configuration 

 

   

    Help Item

 

  Onboard Floppy Controller

 

 

[Enabled] 

 

  Allows BIOS to Enable

  Serial Port Address   

 

  [3F8/IRQ4] 

    or Disable Floppy

  IR Address

 

 

 

 

[2F8/IRQ3]

 

 

 

controller.

    IR Mode 

[IrDA] 

     IR Duplex Mode   

 

  [Half Duplex]

    ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     F1:General Help         

       

F9:Optimized Defaults

[Enabled]

Содержание A7GM Series












































































































Отзывы:

Нет отзывов