manualshive.com logo in svg

Foxconn A78AX Series, Руководство пользователя, Страница: 34 / 106

Поделиться
Скачать
Foxconn A78AX Series Скачать руководство пользователя страница 34

3

27

► CPU Frequency Multiplier

This option is used to adjust the CPU Clock Ratio. Multiply CPU clock with this ratio, you can
get the CPU speed. Increase this ratio may overclock your CPU. This option will be valid if 
your CPU ratio is unlocked and will be displayed only if your CPU is supporting this feature.

► Spread Spectrum

If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)

generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.

Voltage Options

► CPU Voltage Control

This option is used to change the CPU voltage in a step of 25mV. The voltage can be 
incremented from +25mV to +775mV.

► Memory Voltage Control

This option is used to change the DRAM voltage in a step of 50mV. The voltage can be 
incremented from +50mV to +600mV.

► NB Voltage Control

This option is used to change the North Bridge voltage in a step of 30mV. The voltage can be 
incremented from +30mV to +360mV.

► HT/SB Voltage Control

HT/SB Voltage Control

This option is used to change the HT/SB voltage in a step of 30mV. The voltage can be 
incremented from +30mV to +360mV.

                   

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

Voltage Options

   CPU Voltage Control 

[Disabled] 

   

Help Item

  Memory Voltage Control  

[Disabled]

 

NB Voltage Control  

 

[Disabled]

 

 

   HT/SB Voltage Control

[Disabled]

HT/SB Voltage Control    

[Disabled]

 

 

   

     

 

Disabled

 

Disabled

Disabled

   

     

 

 

+25mV

        

 

+50mV

+50mV

        

 

+75mV

+75mV

       

 

+100mV

       

 

+125mV

+125mV

       

 

+150mV

+150mV

       

 

+175mV

+175mV

       

 

+200mV

+200mV

       

 

+225mV

+225mV

       

 

+250mV

+250mV

       

 

+275mV

+275mV

       

 

+300mV

+300mV

       

 

+325mV

+325mV

        

 

+350mV

+350mV

        ↑↓←→:Move       Enter:Select          +/-/:Value         F10:Save        ESC:Exit           

              F1:General Help    

 

F9:Optimized Defaults

[Disabled]

Options

Содержание A78AX Series











































































































Отзывы:

Нет отзывов