background image

3

21

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive 

and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change 
the setting.

► 

Date (mm:dd:yy)

<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read 
Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.

Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.

► Time (hh:mm:ss)

This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use 
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.

► Primary/Secondary/Third IDE Master/Slave

While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices. The display information only applies when SATA
Mode Select is set to [IDE] mode.

► Halt On

This category determines whether or not the computer will stop if an error is detected during 
powering up.
[All Errors] : All errors can result in system halt.

[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The 

halt condition can be enabled/disabled in the next three settings.

► Keyboard

The system boot will not stop for a keyboard error if you enabled this item.

          CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.

                                                    System Information

  Date (mm:dd:yy)

[Mon , 04/07/2008]

Help Item

Date (mm:dd:yy) 

[Mon , 04/07/2008] 

    Help Item

  Time (hh:mm:ss) 

[10 : 59 : 49]

  ► Primary IDE Master

► Primary IDE Master 

[Not Detected]

 

Use [Enter], [TAB]

Use [Enter], [TAB]

  ► Primary IDE Slave

► Primary IDE Slave 

[Not Detected] 

or [SHIFT-TAB] to

  ► Secondary IDE Master

► Secondary IDE Master 

[Not Detected] 

select a field.

  ► Secondary IDE Slave

► Secondary IDE Slave 

[Not Detected]

  ► Third IDE Master

► Third IDE Master 

[Not Detected] 

Use [+] or [-] to 

  ► Third IDE Slave

► Third IDE Slave 

[Not Detected]

 

change system Date.

  Halt On

 

[All Errors, But ...]

  Keyboard

[Disabled]

Keyboard 

[Disabled]

  Mouse

[Disabled]

Mouse 

[Disabled]

  Floppy

[Disabled]

Floppy 

[Disabled]

 

Model Name 

:A74MX-S/A74MX-K

  BIOS ID 

:813F1P01

  BIOS Version 

:08.00.14

  CPU Name     :AMD Athlon(tm) 64 X2 Dual Core

                         

Processor 4200+

    ↑↓←→:Move   Enter:Select     +/-/:Value     F10:Save      ESC:Exit     F1:General Help         

                                                F9:Optimized Defaults

04

Содержание A74MX Series










































































































Отзывы: