5
75
Create RAID 0 (Striped)
Here, we will show you how to create two RAID 0 Logical Drives (LD) by using two
hard disks.
1. Select [2] from the main menu, " LD View Menu" appears.
2. Press [Crtl-C], the screen appears as below, select RAID 0.
3. Use [↓] key to select the hard disks, press [Space] key to change its assignment
status to "Y". Press [Ctrl-Y] to save the setting. And a message prompts. You can
select any of the two options. Here we select the latter option as an example.
< There is no any LD exist >
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Ctrl+C] Define LD
[Enter] View LD [Ctrl+V] View Single Disk [ESC] Exit
[ Define LD Menu ]
[ Keys Available ]
[ LD View Menu ]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No LD Name
RAID Mode Drv
LD 1 Logical Drive 1
RAID 0 2
Stripe Block:
64 KB
Fast Init:
ON
Gigabyte Boundary:
ON
Cache Mode:
WriteThru
Port :ID Drive Model Compatibilities Capacity(GB) Assignment
1 :Mas HDS728090PLA380
SATA 3G
82.34
Y
2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G
120.03
Y
3 :Mas Hitachi HDT725025VLA3 SATA 3G
250.05
N
4 :Mas ST3320620AS
SATA 1.5G
320.07
N
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
[ Define LD Menu ]
[ Define LD Menu ]
[ Drives Assignment ]
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
Please press Ctrl-Y key to input the LD name
or press any key to exit.
If you do not input any LD name,the default
LD name will be used.
[ Keys Available ]
