3
36
Health
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Temperature
These items show the current CPU temperature detected automatically by the system.
► System Temperature
These items show the current System temperature detected automatically by the system.
► CPU Fan1/2 Speed
This item shows the current CPU Fan speed detected automatically by the system.
► System Fan Speed
This item shows the current System Fan speed detected automatically by the system.
► CPU Vcore/+3.3V/+12V SYS/+5V SYS/VBAT
These items show the Current CPU Vcore/+3.3V/+12V SYS/+5V SYS/VDDR/VBAT voltage
detected automatically by the system.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shut Down Temperature
This item is used to set the CPU temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU Fan/System Fan Control
The CPU fan/System fan speed will be adjusted automatically and smartly depending on the
CPU/system temperature. It is used to avoid FAN noise.
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset Boot Power Health Security Exit
Case Open Warning
[Disabled]
CPU Temperature
: +54 C
System Temperature
: +37 C
CPU Fan 1 Speed
: 2738 RPM
CPU Fan 2 Speed
System Fan Speed
: N/A
CPU Vcore
: +1.392 V
+3.3 V : +3.371 V
+12V SYS
: +11.682 V
+5V SYS
: +5.225 V
VDDR : +1.536 V
VBAT
: +3.192 V
CPU Warning Temperature
[Disabled]
CPU Shutdown Temperature
[Disabled]
CPU Smart Fan Control
[Disabled]
System Smart Fan Control
[Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Enabled Case Open Warning
and open chassis, Intrusion
Alarm will appear. If you
don't enter bios setup and
disabled case open wanrning
one time,Intrusion Alarm don't
clear,it will appear all the
time.
Health
