Chapter 3 BIOS Description
57
915M03 Series User Manual
v
PWRON After PWR-Fail (Default: Off)
This option is used to set what action the PC will take with the power supply
when it resumes after a sudden power failure. The available options are: Off
(remain in turn off status),On (auto power on) and Former-Sts (resume with the
previous status).
v
CPU THRM-Throttling (Default: 50.0%)
This option is used to specify the CPU speed (at percentage) to slow down
the CPU when it reaches the predetermined overheat temperature. The
setting values are 75.0%, 50.0%, 25.0%.
v
Power Management Events
Press <Enter> to set the items of power management events. Please
refer to page 58.
v
Primary IDE 0, Secondary IDE 0 (Default: Disabled)
When these items are enabled, the system will restart the power saving time-
out counters when any activity is detected on any of the drives or devices on
the primary or secondary IDE channels. The setting values are Disabled and
Enabled.
v
FDD, COM, LPT Port (Default: Disabled)
when this item is enabled, the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive, serial ports, or
the parallel port.
v
PCI PIRQ[A-D]# (Default: Disabled)
When this option is disabled, any PCI device set as the Master will not power
on the system.
