Foxconn 755 series Скачать руководство пользователя страница 13

Страница: 13 / 104

Chapter 1 Product Introduction

755/760A01 Series User Manual

ATX 12V connector

This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.

AGP slot

This Accelerated Graphics Port (AGP) slot supports 1.5V AGP8X mode
graphics cards for 3D graphical applications.

CPU socket

A 754-pin surface mount, Zero Insertion Force (ZIF) Socket for the AMD

Athlon64 Processor, Support HyperThansport

Technology with 8/16 links,

up to 1600MT/s bandwidth.

North Bridge controller

The SiS 755/760 integrate a high performance host interface for the AMD

Athlon64 Processor, and SiS

MuTIOL technology.

DDR DIMM sockets

These three 184-pin DIMM sockets support up to 3GB system memory
using unbuffered non-ECC PC3200/2700/2100 DDR DIMMS.

ATX power connector

This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).

Super I/O controller

The ITE8705F controller Super I/O provides support that includes floppy,
serial ports, and parallel port to rest of platform through the SiS

755/760 and

SiS 964 via the Low Pin Count (LPC) interface.

Floppy disk connector

This connector accommodates the provided ribbon cable for the floppy
disk drive. One side of the connector is slotted to prevent incorrect insertion
of the floppy disk cable.

755A01-032604.p65

2004-3-26, 15:28

Содержание 755 series









































































































Результаты поиска

Содержание 755 series

Отзывы:

Похожие инструкции для 755 series

Бренды по названию

Популярные бренды

Foxconn 755 series, Руководство пользователя

Результаты поиска

Содержание 755 series

Отзывы:

Похожие инструкции для 755 series

Бренды по названию

Популярные бренды