Congratulations on puchasing the Fox
Stalker Bivvy X manufactured from the
highest quality 210D/4oz Nylon with
a 3000mm Hydrostatic Head.
Treated properly and maintained
correctly, it will provide you with
outstanding performance
season after season. This
leaflet details some of the things you should
know about the Stalker Bivvy X.
GB
S
T
ALKER
B
IVVY
X
GB
S
T
ALKER
B
IVVY
X
About your
Stalker Bivvy X Material
1 All fabrics are affected by temperature. For example, the amount
of moisture in the air or the colder the temperature, the worse the
condensation will become and the harder it will be for the
material to deal with it.
2 Cold damp conditions will cause the material to go slack, whilst
hot/dry temperatures will cause the material to tighten.
This is normal.
3 To maintain its performance, we recommend that the cover is
treated with a reputable re-proofing agent specifically designed
to be compatible with PU coated nylons. When it needs doing is
really a matter of how often you use your Stalker Bivvy X. As a
rule of thumb, any water should ‘bead up’ and run off rather than
soaking into the material.
Maintenance of
my Stalker Bivvy X
How do I store my
Stalker Bivvy X?
You should ensure the Stalker
Bivvy X is dry before being
stored away. If this was not
possible at the end of your
session, you should allow it to
dry out thoroughly when you
get home.
Additional Groundsheet
To compliment your Stalker
Bivvy X an additional PE
groundsheet is available,
featuring corresponding
buckles to match the Bivvy to
allow easy assembly. Supplied
in a nylon sleeve for protection
and storage
.
Stalker Bivvy X
StalkerBivvyX.QXD 18/5/06 10:05 am Page 2