5
21.
Warning
: the use of any non-recommended accessory can present a health risk.
22.
Have the machine repaired
by a qualified person. This machine is built according to relevant safety requirements.
Repairs must only be made by a qualified person using original spare parts, otherwise it may be very dangerous for
the user.
23.
Keep these instructions.
ADDITIONAL SAFETY INSTRUCTIONS FOR THICKNESSERS
1.
WARNING
:
do not
use this machine before it is completely assembled according to the instructions.
2.
IF YOU ARE NOT
totally familiar with the use of thicknessers, seek advice from a qualified person.
3.
MAKE SURE
that the power cord is looked after and the instructions on the recommended electrical connection
are adhered to and that the machine is earthed correctly.
4.
DISCONNECT
the machine before making any adjustments or repairs.
5.
NEVER
turn the machine on before removing all objects on the table (tools, pieces of wood, etc.).
6.
KEEP
the blades sharp and rust-free.
7.
CHECK
feed rollers occasionally to be sure chips and sawdust are not lodged between any components. If rollers
are not seated firmly, the feed rolls will not hold stock firmly against the bed, allowing kickback.
8.
NEVER
use the machine without the guard.
9.
KEEP
fingers and hands away from the cutting zone.
10.
NEVER
put your hands under the chuck when the machine is underway.
11.
KEEP
fingers and hands away from the shavings exit. The pieces can exit at very high speed.
12.
ALWAYS
support the piece being planed adequately
.
13.
DO NOT
start up the machine with the piece to be worked touching the chuck.
14.
ENSURE
that the piece to be worked is free from nails and other foreign objects which could cause physical
wounds or damage blades.
15.
ENSURE
that blades are fixed properly to the chuck, as is explained in the instructions for use, before starting
up the machine.
16.
ALWAYS
let the chuck reach its maximum diet before using the machine.
17.
BEFORE
leaving the machine after using it, ensure the working area is clean and tidy.
