DSR-6000 Set up instructions.
•
Tuning Satellite Feed
–
From the
DSR6000
Main Menu use the
◄►
to select
Install
, press
ENTER.
–
Use the
▼▲
buttons to select the
MANUAL TUNE
menu.
–
From
MANUAL TUNE
menu, verify
Input
=
Port 1
and
Mode
=
Xpndr
–
Use the
◄►
buttons to select
Xpndr,
press
ENTER.
Use the
▲▼
buttons to change the transponder to
21,
press
ENTER
to save.
–
From the
MANUAL TUNE
menu verify the
L-Freq
=
1030.00
MHz
–
Use the
◄►
buttons to move the cursor to
MANUAL TUNE
.
–
Use the
▼
button to find the
MODULATION
menu.
–
Use the
◄►
buttons to select
Mode
, press
ENTER
. Use the
▲▼
buttons to select
DVBS2
, press
ENTER
.
–
Press
◄►
to move the cursor to the left of
MODULATION
.
–
Press
ENTER
to display the
DSR6000
Main Menu.
–
Look for the
SIGNAL
LED to illuminate on the front panel. Wait no more than 30 seconds.
•
Retrieving Unit Address
–
From
DSR6000
Main Menu use the
◄►
to select
Diag
. Press
ENTER
, then use
▼
button to view the
Unit Address
.
–
Contact Fox Network Center for authorization at 1-800-334-1744.
*Go to http://foxcable.com and click on the DSR6000 install technical information
