fox fury TAKER B10, Руководство по эксплуатации продукта

Страница: 3 / 7

4
5
PHYSICAL CHARACTERISTICS
Please read below before using your Taker B10 as it relays beneficial
operating and safety information.
B10 FULL ASSEMBLY (WITH FLASHLIGHT) (P/N 940K–010S)
DIMENSIONS 4.7” x 1.5” x 5.5” (119 x 38 x 140mm)
WEIGHT 12.7oz (360g) (with no battery)
PICATINNY C-CLAMP
(80-013)
DIMENSIONS 2.91” x 1.4” x 1.75” (74 x 36 x 44mm)
WEIGHT 4.9oz (139g)
BATTERIES
The Taker B10 flashlight requires one (1) 18650 battery or two (2)
CR123 batteries.
Mixing of new and used, or different brand batteries is not recommended
as this could lead to leakage or explosion.
BATTERY INSTALLATION AND REPLACEMENT
1. Twist the Tailcap in a counter-clockwise direction to remove it.
2. Insert the battery with the positive end first. (Respect appropriate polarity
when installing).
3. Reinstall the Tailcap by twisting it in a clockwise direction back onto the
Handle. (Make sure the Tailcap is tightly sealed).
4. Test the light’s performance and function by activating the Power/Mode
Switch (located at the end of the Tailcap).
BATTERY LIFE
MODE BATTERY LIFE LUMENS
MOMENTARY 1.5hrs 380
CONTINUOUS HIGH 1.5hrs 380
CONTINUOUS LOW 10hrs 70
TURBO-STROBE ™ 4hrs 380
*Battery life may vary according to mode selected, battery quality and prevailing ambient conditions.
+
BATTERY
–
1
2
TAILCAP
1
2
3
4
WARNINGS
Do not stare into LEDs for long periods of time or from a close range
(less than 2ft (.06m)).
FoxFury’s Turbo-Strobe ™ is purposely designed to induce disorientation.
Prolonged viewing may produce vertigo or even vomiting.
!
!
INCLUDED
SideSlide Picatinny Flashlight (P/N 940K-010PIC)
Picatinny C-Clamp (85-013)