Page | 25
①
ON/OFF button
②
INDICATOR light
③
MODE button
④
AUTO icon
⑤
AC plug icon
⑥
FLAME icon
⑦
TEMP SET button
⑧
SNOWFLAKE icons
NORCOLD N7X/N8X MODELS
The control panel for your fridge is located between the freezer and the fridge.
Automatic
Mode
Operation
-
Touch and release the ON/OFF button
①
to turn the refrigerator on. If the indicator light
②
glows solid
green, the refrigerator is operating correctly.
-
Touch the TEMP SET button
⑦
as needed to set the temperature setting. One snowflake
⑧
lit up is the
warmest, five the coldest setting.
-
If the AUTO icon
④
and the AC PLUG icon
⑤
are lit up, 120V AC power is available to the refrigerator and
it’s operating on AC electric power.
-
If the AUTO icon
④
and the FLAME icon
⑥
are lit up, 120V AC power is NOT available and the fridge is
operating on propane gas.
Manual AC Mode Operation
-
Touch and release the ON/OFF button
①
to start the refrigerator.
-
Touch the MODE button
③
until the AUTO icon
④
goes off and only the AC PLUG icon
⑤
remains lit.
-
Touch the TEMP SET button
⑦
as needed to set the temperature setting. One snowflake
⑧
lit up is the
warmest, five the coldest setting.
Manual LP Gas Mode Operation
-
Touch and release the ON/OFF button
①
to start the refrigerator.
-
Touch the MODE button
③
until AUTO icon
④
goes off and only the FLAME icon
⑥
(LP Gas) remains lit.
-
Touch the TEMP SET button
⑦
as needed to set the temperature setting. One snowflake
⑧
lit up is the
warmest, five the coldest setting.
If there are any problems with the fridge, please read the "Troubleshooting: Fridge" chapter further down. If
the problem cannot be solved, please contact our OnRoad-Service.
To shut down the fridge, touch and hold the ON/OFF button
①
for 2 seconds and release!
Troubleshooting: NORCOLD Fridge
Problem
Cause/Solution
POWER ON Indicator
②
is on solid red
The fridge tried to operate on the selected energy source(s) with no success. Turn
the fridge power OFF and then back ON to RESET.
If operating in AUTO or Manual AC mode, check:
-
That the fridge is plugged into a serviceable outlet.
-
That the AC fuse or circuit breaker is intact.
-
That you plugged in into 110 V or the generator is working.
POWER ON Indicator
②
is on solid red
If operating in the AUTO or GAS mode, check:
-
That the house battery is charged and working.
-
That the valve of the propane tank is open.
