Four-Faith F7 34 Series, Руководство пользователя

Страница: 41 / 92

F7X34 Series Router
User Manual
Xiamen
Xiamen Xiamen
Xiamen Four-Faith
Four-Faith Four-Faith
Four-Faith Communication
Communication Communication
Communication Technology
Technology Technology
Technology Co.,Ltd.
Co.,Ltd. Co.,Ltd.
Co.,Ltd.
Page 41 of 92
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
wireless client
。
Transmission
Transmission Transmission
Transmission Fixed
Fixed Fixed
Fixed Rate
Rate Rate
Rate
：
The default setting is Auto. The range is from 1 to 54Mbps. The rate of
data transmission should be set depending on the speed of your wireless network. You can select
from a range of transmission speeds, or keep the default setting, Auto, to have the router
automatically use the fastest possible data rate and enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible connection speed between the router and a wireless
client.
CTS CTS CTS CTS Protection Protection Protection Protection Mode Mode Mode Mode
：
The default value is disabled. When set to Auto, a protection mechanism
will ensure that your Wireless-B devices will connect to the Wireless-G router when many
Wireless-G devices are present. However, performance of your Wireless-G devices may be
decreased.
Frame
Frame Frame
Frame Burst
Burst Burst
Burst
：
The default value is disabled. Frame burst allows packet bursting which will
increase overall network speed though this is only recommended for approx 1-3 wireless clients,
Anymore clients and there can be a negative result and throughput will be affected.
Beacon Beacon Beacon Beacon Interval Interval Interval Interval
：
The default value is 100. Enter a value between 1 and 65,535 milliseconds. The
Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet
broadcast by the router to synchronize the wireless network. 50 is recommended in poor reception.
DTIM DTIM DTIM DTIM Interval Interval Interval Interval
：
The default value is 1. This value, between 1 and 255, indicates the interval of
the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing
clients of the next window for listening to broadcast and multicast messages. When the router has
buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a
DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and
multicast messages.
Fragmentation Fragmentation Fragmentation Fragmentation Threshold Threshold Threshold Threshold
：
This value should remain at its default setting of 2346. The range is
256-2346 bytes. It specifies the maximum size for a packet before data is fragmented into multiple
packets. If you experience a high packet error rate, you may slightly increase the Fragmentation
Threshold. Setting the Fragmentation Threshold too low may result in poor network performance.
Only minor modifications of this value are recommended.
RTS RTS RTS RTS Threshold Threshold Threshold Threshold
：
This value should remain at its default setting of 2347. The range is 0-2347 bytes.
Should you encounter inconsistent data flow, only minor modifications are recommended. If a
network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be
enabled. The router sends Request to Send (RTS) frames to a particular receiving station and
negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with
a Clear to Send (CTS) frame to acknowledge the right to begin transmission.
Max Max Max Max Associated Associated Associated Associated Clients Clients Clients Clients
：
1-128.
AP AP AP AP Isolation Isolation Isolation Isolation
：
The default value is Off. This setting isolates wireless clients so access to and from
other wireless clients are stopped.
TX
TX
TX TX Antenna/
Antenna/
Antenna/ Antenna/ RX
RX
RX RX Antenna
Antenna
Antenna Antenna
：
Values are Auto, Left, Right, default value is Auto. This is used in
conjunction with external antennas to give them optimum performance. On some router models
left and right antennas may be reversed depending on you point of view.