F3X36 Series Router
User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 39 of 83
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com Tel
：
+86 592-6300326 6300325 6300324 Fax
：
+86 592-5912735
Basic Rate
：
The default value is set to Default. Depending on the wireless mode you have
selected, a default set of supported data rates will be selected. The default setting will
ensure maximum compatibility with all devices. You may also choose to enable all data
rates by selecting ALL. For compatibility with older Wireless-B devices, select 1-2Mbps.
MIMO-Transmission Fixed Rate
：
The default setting is Auto. The range is from 13.5 to
270Mbps. The rate of data transmission should be set depending on the speed of your
wireless network. You can select from a range of transmission speeds, or keep the default
setting, Auto, to have the router automatically use the fastest possible data rate and
enable the Auto-Fallback feature. Auto-Fallback will negotiate the best possible
connection speed between the router and a wireless client
。
Transmission Fixed Rate
：
The default setting is Auto. The range is from 1 to 54Mbps.
The rate of data transmission should be set depending on the speed of your wireless
network. You can select from a range of transmission speeds, or keep the default setting,
Auto, to have the router automatically use the fastest possible data rate and enable the
Auto-Fallback feature. Auto-Fallback will negotiate the best possible connection speed
between the router and a wireless client.
CTS Protection Mode
：
The default value is disabled. When set to Auto, a protection
mechanism will ensure that your Wireless-B devices will connect to the Wireless-G router
when many Wireless-G devices are present. However, performance of your Wireless-G
devices may be decreased.
Frame Burst
：
The default value is disabled. Frame burst allows packet bursting which will
increase overall network speed though this is only recommended for approx 1-3 wireless
clients, Anymore clients and there can be a negative result and throughput will be
affected.
Beacon Interval
：
The default value is 100. Enter a value between 1 and 65,535
milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A
beacon is a packet broadcast by the router to synchronize the wireless network. 50 is
recommended in poor reception.
DTIM Interval
：
The default value is 1. This value, between 1 and 255, indicates the
interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown
field informing clients of the next window for listening to broadcast and multicast
messages. When the router has buffered broadcast or multicast messages for associated
clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and
awaken to receive the broadcast and multicast messages.
Fragmentation Threshold
：
This value should remain at its default setting of 2346. The
range is 256-2346 bytes. It specifies the maximum size for a packet before data is
fragmented into multiple packets. If you experience a high packet error rate, you may
slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too
low may result in poor network performance. Only minor modifications of this value are
recommended.
