F2X46-DK Series IP Modem User Manual
Xiamen Four-Faith Smart Power Technology Co.,Ltd
.
Add
：
Floor 11, Area A06, No 370, chengyi street, Jimei, Xiamen.China
Page 22 of 33
Fax
：
0592-5912735
Tel
：
0592-6300320
Hotline
：
400-8838-199
UDP frame type: ASCII type or HEX type, ASCII type use ASCII character , HEX type
use HEX character
。
UDP login frame: For the enterprise gateway connection mode is pure UDP.
UDP login response frame: For the enterprise gateway connection mode is pure UDP.
UDP heartbeat frame: For the enterprise gateway connection mode is pure UDP.
UDP heartbeat response frame: For the enterprise gateway connection mode is pure
UDP.
UDP drop out frame: For the enterprise gateway connection mode is pure UDP.
UDP drop out and response frame: For the enterprise gateway connection mode is
pure UDP.
Note: This configuration is only valid if the enterprise gateway connection is pure UDP,
the login frame and the login response frame must be configured at the same time, as well
as other frames.
The purpose is to enable the enterprise gateway to know about the state of the bottom
device in real time.
3.3 Read/Write configuration
Click "Read" when the power-on hardware detection is normal and you log in as the
administrator, the configuration parameters in the device can be read to the configuration
software interface display, at this point, you can view the parameter configuration of the item.
If read successfully, “Parameter loading successfully “ will be displayed in the log contents
information bar,showing as below:
