NVR100 User Manual
Address: 11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China.
Website: www.fourfaith.com Tel: +86-592-5907276 Fax: +86-592-5912735
19
/ 6
5
3.2.2 Install Web Plugin
Run the ff-video-plugin.exe, by using IE
FF-video-Plugin_
2.4.6.exe
3.2.3 Login to the NVR Web Page
This chapter describes the main functions of each page. Web tools can be accessed
through a web browser using a computer connected to the NVR. There are five level
pages: video, video settings, system configuration, system management, system
information.
The video page is the OCX control of video related functions, and the video setting is the
related functions of video function parameter configuration. System configuration is
divided into two pages: general settings, coding settings, network settings, network
services, output mode, alarm settings, time settings.
System management is divided into two levels: hard disk management, user management,
automatic maintenance, default recovery, system upgrade, boot mode, restart.
System information is divided into two pages: log information, version information.
Access the device's web-based Web management tool, launch IE or another browser, and
enter the device's default IP address 192.168.1.254 in the "address" field. Press Enter. If
you login to the Web page for the first time, you can see the page as follows, and prompt
the user to enter the username and password. The default username and password of the
device is admin (can be set and modified in the user management page).
