Four E's Scientific TC0401005 Скачать руководство пользователя страница 4

• Beware of hazards due to:

   - Flammable materials

   - Combustible media with a low boiling temperature

   - Incorrect container size

   - Overfilling of media

   - Unsafe condition of container.

• Only process media that will not react dangerously to the extra

   energy produced through processing. This also applies to any

   extra energy produced in other ways, e.g. through light

   irradiation.

• Bear in mind the possibility of contamination that might lead to

   undesirable chemical reactions.

• Wear your personal protective equipment in accordance with

   the hazard category of the media to be processed.

   Otherwise there is a risk from:

   - Splashing and evaporation of liquids

   - Ejection of parts

   - Release of toxic or combustible gases

• Do not heat liquid media except with the block. Never pour 

   liquid media directly on to the heating plate!

• Accessories must be securely attached to the machine and

   can’t come off by themselves.

• Always disconnect the plug before fitting accessories.

• Safe operation is only guaranteed with the accessories

   described in the “Accessories” chapter.

• The appliance must only be disconnected from the mains

   supply by pulling out the plug-in power supply unit.

To the protection of the equipment. 

- The appliance may only be opened by experts.

- Do not cover the device, even partially e.g. with metallic plates 

  or film. This results in overheating.

- Protect the appliance and accessories from bumps and impacts.

3

Содержание TC0401005











Отзывы: