6
Trial run
• Make sure the required voltage corresponds to the mains voltage.
• Ensure the socket must be properly grounded.
• Switch on and start initializing.
• Add sample into the container with an appropriate stirring bar.
• Place the container on the working plate.
• Set the target speed and start stirring.
• Observe the stirring bar and the LED display.
• Set the time and start timing.
• Observe the actual speed and timing on the LED display.
• When timer function starts, the LED will display the
remaining stirring time.
• Timer function is switched on/off by pressing the timer setting.
If the above operations are normal, the device is good to run. If
these operations are abnormal, the device may probably be
damaged during transit, please contact manufacturer/supplier
for technical support.
Warning!
DO NOT move the container when the device is
working.
Timing
Timing function is activated for stirring period timing ONLY when
Stirring function is ON. LED displays the remaining stirring time
limits. The stirring function will be automatically shut down when
the timer display comes to zero. If timing function is off, or shut
down in the halfway, the device will keep stirring.