Page 3
ASSEMBLY INSTRUCTIONS
Assemble Wand, Shut-Off & Nozzle
1. Install the Wand onto the Shut-off and
tighten the Nut securely.
(Figure C, Step 1)
2. Install selected Nozzle onto the end of the
Wand and tighten securely.
(Figure C, Step 2)
Assemble Hose To Tank
IMPORTANT: Do not attempt to heat or alter hose,
hose nut, or barb prior to assembly.
1. Align Hose Barb tabs, push Hose Barb into Tank
until it stops
(See Figure A)
.
2. Slide Hose Nut into place and turn clockwise to
tighten.
(See Figure B)
.
NOTE: Do not use tools to tighten Hose Nut.
Figure A
Figure B
SELECT NOZZLE FROM LIST BELOW
A. Cap Nut
B. Foaming Nozzle
C. Adjustable Cone Nozzle
D. Red High-Volume Fan Nozzle
E. Yellow Low-Volume Fan Nozzle
F. Flat Seal
G. Adapter
H. Wand
C
A
G
B
D
F
H
E
ADJUSTABLE CONE USES:
Spot spraying in or around flower
beds, trees, and shrubs.
Edging along fences, driveways,
and walkways.
Killing brush such as poison ivy,
poison oak, kudzu and wild
blackberry.
Preparing garden beds for
planting of ornamentals and
vegetables.
For precision spraying in
confined areas such as
gardens and flower beds.
FAN NOZZLE USES:
Lawn replacement. Kill lawn
and weeds before planting a
new lawn.
Preparing large areas for
planting of ornamental and
vegetable gardens.
RED HIGH VOLUME
YELLOW LOW VOLUME
FAN NOZZLE USES:
FOAMING NOZZLE USES:
Spot spraying in flower beds,
walkways, driveways, and
patios, around trees and shrubs.
Edging along fences, driveways
and walkways.
Killing brush such as poison
ivy, poison oak, kudzu and wild
blackberry.
Figure C
Figure D
Step 2
Step 1
Figure C
Figure D
Figure E
Hose Nut
Hose Barb
Shut-Off
Wand/Extension
Nozzle
